Attaching Electric Bass Strings To Your Fretboard

Electric bass strings are a type of string that is attached to the fretboard. It’s important that you use the right kind of electric bass strings, as they not only make your playing sound better, but they can also protect your fretboard.

What is the Fretboard?

The fretboard is the surface of a guitar that is closest to the player’s hand. It contains 21 frets, each of which lies one half-step apart. The strings are tuned to specific notes on the fretboard, and the player must use their fingers to “play” the notes.

How to Attach Electric Bass Strings

Electric bass strings are typically attached to the instrument’s fretboard with either a “thru-neck” or “bolt-on” type of bridge. The following steps will provide detailed instructions on how to attach electric bass strings to your fretboard using either method:

  1. Locate the string placement marker on the fretboard, typically near the 12th fret. This will help you determine where to place each string’s bridge pin.
  2. Place each bridge pin into the string placement marker, making sure it is fully engaged in the hole. Make sure that the string’s wire is positioned between the bridge and fingerboard so that it does not touch any other strings during play.
  3. Tighten each screw on the bridge until it is snug against the fretboard, but does not over-tighten and damage the board or strings.


If you’re like most bass players, you probably don’t have a lot of experience with String Attachment techniques. In this article, we’ll be discussing the basics of string attachment and provide some tips on how to do it properly. Once you’ve learned the basics, check out Alice Strings and find the perfect fit for your playing style.

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button